Ekan®MIX 618

High Range Water Reducing New Generation Super Plasticiser

EN 934-2 T 3.1 / T 3.2

  • EKAN®MIX 618 is a new generation high range water-reducing polycarboxylate-based superplasticising admixture.

  • EKAN®MIX 618 facilitates the workability and placement of concrete while ensuring a good concrete surface. It contributes to improving the rheology of the concrete, aiding in maintaining consistency and homogeneity. It is suitable for use in conditions where high workability is desired.
  • EKAN®MIX 618 enables concrete production at low water/cement ratios, which results in an increased water impermeability of concrete.
  • EKAN®MIX 618 should not be used with products based on naphthalene sulfonate.

Share this product

Download TDS

Technical

Data

Appearance

Homogeneous

Light Brown

1.040 ± 0.03 kg/lt

4.50 ± 1.0

Packaging

Bulk

Plastic Tank: 1100 kg

Areas of Use

  • All types of cement (except for aluminous cement)

  • Ready-mix concrete

  • Reinforced concrete

  • Mass concrete

  • Pumped concrete

Application

Dosage: 0.8 kg – 2.0 kg per 100 kg cement.

Optimum dose of EKAN®MIX 618 should be established after local tests considering expected mechanical properties of the cement and fluidity of the mixture.

EKAN®MIX 618 is fully water-soluble. For best performance, it is recommended to add the product to the second half of the mixture water.

For further information please contact with EKAN sales representatives.

Measures

EKAN®MIX 618’s shelf life is 12 months when stored in its original package and away from direct sunlight.

After a long idle period, shake, mix the product or use a circulation pump to homogenize it before use.

After a freezing-thawing cycle, mix the product before use.

Avoid contact with eyes and skin. Detailed health and safety information is available in the Material Safety Data Sheet (MSDS)