Ekan® SMART 2015-S

Water Reducing, Plasticising Admixture
EN 934-2 T 10

  • EKAN®SMART 2015 S is a water-reducing and set-retarding mid-range plasticiser.
  • EKAN®SMART 2015 S is used, under various climatic conditions, when concrete homogeneity, pumpability, and workability are desired. It facilitates easy casting of concrete by enhancing its mechanical properties.

  • Additionally, EKAN®SMART 2015 S contributes to the water impermeability of concrete to a certain extent by reducing the water/cement ratio.

Share this product

Technical Data

Homogeneous

Brown

1.08 ± 0.03 kg/lt

6.00 ± 1.5

Bulk

Plastic Tank: 1100 kg

Areas of Use

  • All types of cement (except for aluminous cement)

  • Ready-mix concrete

  • Reinforced concrete

  • Mass concrete

  • Pumped concrete

Application

Dosage: 0.5 kg – 1.5 kg per 100 kg cement.

Optimum dose of EKAN®SMART 2015 S should be established after local tests considering expected mechanical properties of the cement and fluidity of the mixture.

EKAN®SMART 2015 S is fully water-soluble. For best performance, it is recommended to add the product to the second half of the mixture water.

For further information please contact with EKAN sales representatives.

Measures

EKAN®SMART 2015’s shelf life is 12 months when stored in its original package and away from direct sunlight.

After a long idle period, shake, mix the product or use a circulation pump to homogenize it before use.

After a freezing-thawing cycle, mix the product before use.

Avoid contact with eyes and skin. Detailed health and safety information is available in the Material Safety Data Sheet (MSDS).