Surface Preparation<\/b><\/p>\n
The surface must be clean, dry, smooth and solid. The surface must be cleared of loose residues that will prevent adhesion. It should not be shaken more than necessary to avoid excessive air entry.<\/p>\n
For Plaster Mortars<\/b><\/p>\n
EKAN\u00aeLATEX \/ Water Ratio for plasters: It should be mixed in a clean container at a ratio of 1\/3-1\/4. Cement\/ sand ratio in the mortar should be 1\/3. The dry mixture should be added to the liquid mixture to form a liquid mortar.<\/p>\n<\/div>
For Repair Mortars<\/b><\/p>\n
To prevent sudden water loss and shrinkage cracks that
\noccur especially in hot weather, EKAN\u00aeLATEX<\/b> should be mixed with water in a clean container at a ratio of 1\/2-1\/3.<\/p>\n<\/div><\/div><\/div><\/i>Application<\/h4><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div>
<\/div><\/div><\/div>
- <\/i><\/span>
\n
The cement\/sand ratio in the mortar should be 1\/2-1\/3, and the size of the sand grains should be determined according to the thickness of the plaster to be applied to the
surface<\/p>\n<\/div><\/li>
- <\/i><\/span>
\n
Dry mixture should be added to the liquid mixture to create a homogeneous one<\/p>\n<\/div><\/li>
- <\/i><\/span>
\n
For primer applications and to enhance adhesion: EKAN\u00aeLATEX<\/b> should be mixed with water in a clean container at a ratio of 1\/1, and cement should be added until it reaches a porridge-like consistency<\/p>\n<\/div><\/li>- <\/i><\/span>
\n
The resulting cement slurry should be applied by brush or poured onto the surface<\/p>\n<\/div><\/li>
- <\/i><\/span>
\n
Plaster or screed should be applied before the surface dries completely.<\/p>\n<\/div><\/li>
- <\/i><\/span>
\n
In tile and ceramic adhesive applications, EKAN\u00aeLATEX <\/b>slurry should be applied to the surface.<\/p>\n<\/div><\/li>- <\/i><\/span>
\n
For adhesion, the EKAN\u00aeLATEX<\/b>\/water mixture should be applied to the surface as a primer.<\/p>\n<\/div><\/li><\/ul><\/div><\/div>